E-flite Inverza 280 BNF Manual de Instruções descarregar pdf (Página 13)

Service of Power Components

Disassembly

CAUTION: Always disconnect the battery

before handling or adjusting the propeller

or motor. Failure to do so could result in

personal injury.

Propeller

1. Remove the 2 screws (A) from the spinner (B).

Carefully separate the spinner from the back

plate (C).

2. Remove the lock nut (D) from the propeller

shaft (E), then remove the propeller (F) and

back plate.

Motor and Firewall

1. Carefully remove the cowling (G) from the

fuselage. Paint may hold the cowling on the

fuselage.

2. Loosen the set screws (H) and remove the

washer (I) before removing the propeller shaft

from the motor (J).

3. Remove the 4 screws (K) and motor mount (L)

from the fuselage.

4. Disconnect the motor wires from the ESC.

5. Loosen the set screws (M) and remove the

motor from the motor mount.

Assemble in reverse order.

Assembly Tips

• Correctly align and connect the motor wire

colors with the ESC wires.

• The propeller size numbers (6.8 x 3.5) must face

out from the motor for correct propeller operation.

• Ensure the spinner is fully connected to the

spinner back plate for safe operation.

A B

HIJ

KL M

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 19

Sem comentários

E-flite Inverza 280 BNF Manual de Instruções Página 13