E-flite C-Ray 180 Manual de Instruções descarregar pdf (Página 12)

Service of Power Components

Disassembly

CAUTION: Always disconnect the battery

before handling or adjusting the propeller

or motor. Failure to do so could result in

personal injury.

1. Remove the canopy.

2. Carefully remove the propeller screw (A),

washer (B) and propeller (C).

3. Remove the propeller spacer setscrew (D) and

propeller spacer (E) from the motor shaft.

4. The motor housing and shaft (F) are

magnetically secured to the motor. Remove the

motor housing and shaft by pulling them away

from the motor. Repair or replace the motor

housing and shaft as necessary.

5. Remove the top screw (G) from the firewall to

remove the motor (H). The motor magnet may

attract screws to the motor.

6. Disconnect the motor wire connectors from

the ESC.

7. Remove the motor from the firewall.

Assemble in reverse order.

• Connect the motor wire connectors to the ESC so

that the propeller turns clockwise (facing the rear

of the aircraft). If the motor turns in the wrong

direction, switch any 2 motor wires.

• The propeller size numbers (4.5 x 4) must face

forward towards the front of the aircraft for

correct propeller operation.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18

Sem comentários

E-flite C-Ray 180 Manual de Instruções Página 12